90mm Standard
460 mlStandard profile
90 mmTop diameter
Discuss this variant PLA CUP RANGE / 14OZ
14oz PLA Cups
14oz PLA Cups in this range include three distinct dimensional formats: 460ml with a 90mm rim, 414ml with a 93mm rim, and 450ml with a 98mm rim. Although they share the same nominal 14oz group, each option has a different combination of capacity, height and bottom diameter. Compare the actual dimensions required for the project first, then confirm any PLA-related finished-product documentation or market requirements separately.
Request a 14oz Quote
Compare listed variant measurements below.
Values shown are supplied per variant.14oz PLA Cups OVERVIEW
414 / 450 / 460 ml options in one capacity group
The three listed 14oz PLA cups follow different dimensional combinations rather than one common cup geometry. The 460ml / 90mm standard option is the tallest at 115mm with a 56mm bottom diameter. The 414ml / 93mm cup measures 110mm high with a 52mm bottom diameter, while its profile is not specified in the current product data and should not be assumed.
The 450ml / 98mm standard option is 107mm high with a 60mm bottom diameter, giving it the widest listed rim and largest bottom diameter in this group. These differences make actual capacity, rim, height and bottom diameter more useful selection criteria than the 14oz label alone.
PLA material considerations
PLA is polylactic acid and is commonly produced from renewable feedstocks, but material origin alone does not establish a finished cup’s environmental, disposal or compliance status. For a 14oz PLA sourcing project, identify the required cup dimensions first and review any environmental label, disposal statement or target-market documentation against the specific finished product.
Browse the PLA category →CUP VARIANT MATRIX
Compare the 14oz range
Different rim and profile options remain inside this capacity page, so you can compare cup formats on one page.
93mm Cup
414 mlProfile not specified
93 mmTop diameter
Discuss this variant 98mm Standard
450 mlStandard profile
98 mmTop diameter
Discuss this variant VARIANT SPECIFICATION COMPARISON
Listed dimensions for each option
| Variant | Listed capacity | Top diameter | Bottom | Height | Weight | Shape |
|---|---|---|---|---|---|---|
| 90mm Standard | 460 ml | 90 mm | 56 mm | 115 mm | 10g / 9g | Standard profile |
| 93mm Cup | 414 ml | 93 mm | 52 mm | 110 mm | 12g / 11g | Profile not specified |
| 98mm Standard | 450 ml | 98 mm | 60 mm | 107 mm | 11g | Standard profile |
Measurements apply to the individual variant. A dash indicates an unlisted measurement. Use the selected cup specification as the project reference.
COMPARE CUP FORMATS
14oz PLA: shape and rim choices
The oz group is a starting point. Compare actual ml, rim, base and height before choosing a cup.
Standard
Compare the listed height and base diameter for the intended serving and packaging format.
Read the measurements together
- Nominal oz / listed ml
- Variants in one oz group may have different listed ml capacities. Use the individual record for your brief.
- Rim and closure
- Select a cup first. Confirm the lid style and physical fit against that cup; diameter alone is not a compatibility guarantee.
- Height and base
- Compare the footprint and profile against your presentation and packaging requirements. A dash means the measurement is not listed.
- Branding and order
- Include artwork needs, quantity and destination when known. Commercial terms and product documents need project-specific confirmation.
LID OPTIONS
Review lid families by selected rim.
Lid options can be discussed by rim family. The final cup-and-lid match should be confirmed against the exact variant, rather than assumed from nominal capacity alone.
90 mm
Buyers should confirm the final cup-and-lid combination against the exact selected PLA cup variant and project requirements.
93 mm
Buyers should confirm the final cup-and-lid combination against the exact selected PLA cup variant and project requirements.
98 mm
Buyers should confirm the final cup-and-lid combination against the exact selected PLA cup variant and project requirements.
CUSTOM CUPS & BRANDING
Build a cup brief around the selected variant.
Ruige’s packaging manual presents custom packaging and printed cup examples. Share the size, selected rim, artwork and beverage format so project-specific options can be reviewed.
Explore Custom CupsYour custom cup brief
Begin with 14oz PLA Cups, the preferred 90 / 93 / 98 mm rim and the selected cup profile. Add your logo or artwork requirements and the beverage presentation you want to review.
Discuss this custom cup →APPLICATIONS
14oz formats in a beverage program
Cold coffee formats
For cold coffee projects, compare the three actual size combinations rather than selecting by 14oz alone. The 460ml / 90mm option is the tallest listed format, while the 450ml / 98mm option uses the widest rim and largest bottom diameter. The 414ml / 93mm cup provides a third dimensional combination for projects requiring that specific capacity and rim.
Fruit tea presentation
For fruit tea presentation, the 90mm, 93mm and 98mm options provide different cup proportions within the same nominal size group. Compare the listed capacity, rim, height and bottom diameter against the intended packaging format before confirming the selected variant.
Takeaway cold drinks
For takeaway cold drink projects, use the exact variant dimensions when preparing the sourcing brief. The current range covers 414ml, 450ml and 460ml capacities across three different rim sizes, so a request for “14oz PLA cups” alone does not identify one specific format.
PRODUCTION & QUALITY REQUIREMENTS
A clear specification for the next conversation.
Product confirmation
Identify PLA, nominal size and the selected variant. Keep its listed measurements attached to the enquiry.
Cup and lid review
Confirm the rim and proposed closure together. Record any sample-fit requirements before an order is agreed.
Artwork and documentation
State the branding brief and destination-market documentation needed for the exact product. Do not assume a document covers every cup.
Order details
Request confirmation of quantity, packing and timing for the selected project. Retain the agreed specification for future enquiries.
FAQ
14oz PLA Cups: buyer questions
Why does the 14oz PLA range include 414ml, 450ml and 460ml cups?
The 14oz page groups commercially related PLA cup formats rather than defining 14oz as one exact milliliter specification. The three listed options also use different rim, height and bottom-diameter combinations, so buyers should use the individual variant specifications when selecting a cup.
What is the difference between the 90mm and 98mm 14oz PLA cups?
The 90mm standard option is listed at 460ml, 115mm high and 56mm bottom diameter. The 98mm standard option is 450ml, 107mm high and 60mm bottom diameter. The 90mm cup is taller, while the 98mm option has the wider rim and larger listed bottom diameter.
What is known about the 93mm 414ml PLA cup?
The 93mm option is listed at 414ml capacity, 110mm height and 52mm bottom diameter. Its profile is not specified in the current product data, so buyers should use the confirmed dimensions rather than assuming a particular cup shape.
Which dimensions should I compare when selecting a 14oz PLA cup?
Compare the actual capacity, rim diameter, height and bottom diameter of the listed variants. The current 14oz PLA range includes three different dimensional combinations, so the nominal ounce description alone is not sufficient to identify the required cup.
What information should I provide for a 14oz PLA cup sourcing request?
Provide the required capacity, rim size or dimensional preference, intended cold beverage application and any finished-product documentation or target-market requirements that need to be reviewed. Environmental, disposal or compliance claims should be confirmed against the specific finished product rather than inferred from the PLA material name alone.
14OZ PLA CUP ENQUIRY
Start with the 14oz variant you need.
Send the selected rim or profile, quantity, destination and artwork requirement if applicable.
Request a Quote